Operation
Cond 7310
20
ba75933e04
06/2013
4.4.5 Example 2 on navigation: Setting the date and time
The measuring instrument has a clock with a date function. The date and time
are indicated in the status line of the measured value display.
When storing measured values and calibrating, the current date and time are
automatically stored as well.
The correct setting of the date and time and date format is important for the fol-
lowing functions and displays:
Current date and time
Calibration date
Identification of stored measured values.
Therefore, check the time at regular intervals.
7.
Open the setting mode for the
Language
with
<ENTER>
.
8.
Select the required language with
<
><
>
.
9.
Confirm the setting with
<ENTER>
.
The meter switches to the measuring mode.
The selected language is active.
After a fall of the supply voltage (empty batteries), the date and time
are reset to 01.01.2011 00, 00:00 hours.
Language:
Deutsch
Beep:
Off
Illumination:
On
Contrast:
48 %
Switchoff time:
30 min
General
01.07.2011
08:00
Back
Language:
Deutsch
Beep:
Off
Illumination:
On
Contrast:
48 %
Switchoff time:
30 min
General
01.07.2011
08:00
Back
Summary of Contents for Cond 7310
Page 58: ...Index Cond 7310 58 ba75933e04 06 2013...
Page 59: ......
