5-50
Basic Configuration
5.9.8.3. Modifying LDAP Groups
If you want to modify an existing LDAP Group in order to change parameters or plug
access rights, the "Modify LDAP Group" function can be used to reconfigure group
parameters. To Modify an existing LDAP Group, access the RSM-8R command mode
using a password that permits access to Administrator Level commands. Once you
have accessed the Modify LDAP Group menu, use the menu options to redefine
parameters in the same manner that is used for the Add LDAP Group menu, as
discussed in Section 5.9.8.1.
Note:
After you have finished modifying LDAP Group parameters, make certain
to save the changes before proceeding. In the Web Browser Interface, click on
the "Modify LDAP Group" button to save parameters; in the Text Interface, press
the
[Esc]
key several times until the RSM-8R displays the "Saving Configuration"
message and the cursor returns to the command prompt.
5.9.8.4. Deleting LDAP Groups
The Delete LDAP Group function is used to delete LDAP Groups that are no longer in
use. In order to delete LDAP Groups, you must access the RSM-8R command mode
using a password that permits access to Administrator Level commands.