17-8
Command Reference Guide
/ON
Switch Plug(s) ON
Switches selected plugs(s) or Plug Group(s) On, as described in Section 9.2.2. When
the /ON command is used to switch more than one plug, Boot/Sequence Delay Period
will be applied as described in Section 5.7.
Note:
When this command is invoked in Administrator Mode or SuperUser
Mode, it can be applied to all RSM-8R plugs and Plug Groups. When this
command is invoked in User Mode, it can only be applied to the plugs and/or
Plug Groups that have been enabled for your account.
Availability:
Administrator, SuperUser, User
Format:
/ON <n>[,Y]
[Enter]
Where:
n
The number or name of the plug(s) or Plug Group(s) that you intend to
Switch On. To apply the command to several plugs, enter a plus sign (+)
between each plug number. To apply the command to a range of plugs,
enter the numbers for the first and last plugs in the range, separated by a
colon character (:). To apply the command to all plugs allowed by your
account, enter an asterisk character (*).
,Y
(Optional) Suppresses the command confirmation prompt.
Example:
Assume that your account allows access to Plug 2 and Plug 3. To switch Plugs 2 and
3 On, without displaying the optional command confirmation prompt, invoke following
command line:
/ON 2+3,Y
[Enter]