5-7
Basic Configuration
•
Management Utility:
Enables/Disables the Device Management Utility (DMU.)
When enabled, the DMU allows you to manage multiple WTI units via a single
menu. For more information on the DMU, please refer to the DMU User's Guide,
which can be found on the WTI website at:
http://www.wti.com/t-product-manuals.aspx
(Default = Off.)
Note:
Although the Management Utility can be enabled/disabled via either the
Web Browser Interface and Text Interface, the Management Utility can only be
accessed and operated via the Web Browser Interface.
•
Scripting Options:
Provides access to parameters that are used to set up the
RSM-8R unit for running various scripts.
Note:
In the Text Interface, the Scripting Options submenu is accessed via
item 12. To access the Scripting Options parameters via the Web Browser
Interface, place the cursor over the "General Parameters" link, wait for the flyout
menu to appear, then click on the "Scripting Options" link.
The Scripting Options menu allows the following parameter to be defined:
Command Prompt:
This item can be used to redefine the command prompt
that will be displayed when the unit is accessed via the Text Interface. The
command prompt can be set to either "TSM" or "RSM". (Default = RSM.)
•
Energywise Configuration:
Defines parameters that are needed in order for the
RSM-8R to serve as an element in a Cisco Energywise network. This item allows
the following parameters to be defined:
Enable:
Enables/disables the RSM-8R unit's ability to particapate in a Cisco
Energywise network. (Default = Off)
Domain:
The Energywise Domain Name; up to eighty characters long.
(Default = Undefined.)
Secret:
A password that is used to authenticate each element in a Cisco
Energywise network. The Secret parameter can be up to eighty characters long.
(Default = Undefined.)
•
Serial Number:
Allows the serial number for the RSM-8R unit to be saved and
displayed. When this parameter is defined, the serial number can be displayed via
the Product Status screen in the Web Browser or by invoking the /J* command in
the Text Interface. Since the serial number plate on the RSM-8R unit is not always
easily accessible after installation, it is often helpful to define the serial number here
in order to simplify the process of determining the serial number later.
(Default = undefined.)