2-9
Unit Description
2.9. NPS-16HD Series - Front Panel
www.wti.com
NPS-16
Network Power Switch
SETUP PORT
DEFAULT
OUTPUT STATUS
RESET
ON RDY
A1
A2
A3
A4
A5
A6
A7
A8
B1
B2
B3
B4
B5
B6
B7
B8
A1 - A4
A5 - A8
B5 - B8
B1 - B4
1 2 3 4 5
6
8
7
Figure 2.9: NPS-16HD Series - Front Panel
As shown in Figure 2.9, the NPS-16HD Series Front Panel includes the following
components:
1.
SetUp Port:
An RJ45 RS232 serial port (DCE configuration) used for connection to
a local terminal or external modem, as described in Section 4.3. For a description
of the Setup Port interface, please refer to Appendix B.
2.
"ON" Indicator:
An LED that lights when power is applied to the NPS.
3.
"RDY" Indicator:
(Ready) Flashes if unit is ready to receive commands.
4.
Default Button:
Toggles outlets On/Off or resets unit to factory default parameters
as described in Section 2.11.
5.
Reset Button:
Reboots and/or resets the NPS to factory defaults as described in
6.
Output Status Indicators:
LEDs light when corresponding outlet is switched On.
7.
Branch A Circuit Breakers:
Two circuit breakers, which protect Branch A outlets.
One circuit breaker protects outlets A1 through A4, and the other circuit breaker
protects outlets A5 through A8.
• NPS-16HD20-1 Units: Two 20 Amp Breakers (One Breaker per Branch.)
• NPS-16HD20-2 Units: Two 20 Amp Breakers (One Breaker per Branch.)
• NPS-16HD16-3 Units: Two 16 Amp Breakers (One Breaker per Branch.)
8.
Branch B Circuit Breakers:
Two circuit breakers, which protect Branch B outlets.
One circuit breaker protects outlets B1 through B4, and the other circuit breaker
protects outlets B5 through B8.
• NPS-16HD20-1 Units: Two 20 Amp Breakers (One Breaker per Branch.)
• NPS-16HD20-2 Units: Two 20 Amp Breakers (One Breaker per Branch.)
• NPS-16HD16-3 Units: Two 16 Amp Breakers (One Breaker per Branch.)
