2-4
Unit Description
2.4. NPS-8HS Series - Back Panel
A1
A 2
A3
A4
A5
A6
A7
A8
ACT
A
B
ALARM
LINK
1
2
3
4
Figure 2.4: NPS-8HS Series - Back Panel
As shown in Figure 2.4, the NPS-8HS Series Back Panel includes the following
components:
1.
Power Inlet:
Supplies power to NPS control functions and outlets.
• NPS-8HS20-1 Units: One IEC 60320 C20 inlet, for 100/120V power.
• NPS-8HS20-2 Units: One IEC 60320 C20 inlet, for 100/240V power.
• NPS-8HS16-3 Units: One IEC 60320 C20 inlet, for 200/240V power.
2.
Switched Outlets:
AC Outlets that can be switched On, Off, rebooted or set to
default state in response to user commands.
• NPS-8HS20-1 Units: Eight NEMA 5-15R Outlets.
• NPS-8HS20-2 Units: Eight IEC 60320 C13 Outlets
• NPS-8HS16-3 Units: Eight IEC 60320 C13 Outlets
3.
Alarm Indicator Lights:
Two LEDs which light when an alarm condition is
detected. For information on Alarm Configuration, please refer to the
WTI Firmware Guide.
4.
Network Port:
An RJ45 Ethernet port for connection to your 10/100/1000Base-T,
TCP/IP network. Note that the Network Port also includes two, small LED indicators
for Link and Data Activity. For more information on Network Port configuration,
please refer to the WTI Firmware Guide.
