40
Montage- und Betriebsanleitung
Installation and Operating Instructions
EN
Key
1
| Stop screw for axial tool length adjustment
View of the hydraulic chuck from below
Fig. 5:
4.2
Marking of the actuating elements
Marking for clamping force check: Three possible positions on the clamping chuck
Fig. 6:
Montage- und Betriebsanleitung
Installation and Operating Instructions
41
EN
Key
1
| + Clamp tool (in clockwise direction)
2
| - Unclamp tool (in anticlockwise direction)
Indication of the direction of rotation for clamping and un-
Fig. 7:
clamping the tool
4.3
Tools and materials required
•
Allen screws 1.5, 3 and 4 for the stop screw for axial tool length adjustment
•
Allen screw 5 for the clamping screw