WTC Technitron T2050, Description And Instructions

Page: 50 / 61

1``\YSQdY_^5hQ]`\U
$& =_TYVYUT*(!% ! DUSX^Ydb_^D" % GU\T3_^db_\
$VVLJQ6FKHGXOH
Assign Schedule #5 to release and eject the part:
SCHEDULE=5
VALVE=0
;Turn off the clamp and gun
before the clamp is energized.
SQUEEZE DELAY=0 ;N/A
SQUEEZE=40 ;Give the clamp and electrodes
time to open before ejection.
UPSLOPE=0 ;N/A
WELD CYC=0
;N/A
WELD CUR=65% ;N/A
COOL=0 ;N/A
IMPULSES=1
;N/A
DOWNSLOPE CYC=0 ;N/A
SLOPE END CUR=20
;N/A
QUENCH CYC=0 ;N/A
TEMPER CYC=0 ;N/A
TEMPER CUR=0 ;N/A
HOLD CYC=10 ;N/A
WELD COMPLETE=30 ;Energize the ejector for a half-
second to eject the part. Use the
WCOMP output.
SUCCESSIVE SCH=0 ;N/A
CHAIN SCH=0
;NA
OFF CYC=0 ;Off Single turns off all valves.
This completes the operation.