manualshive.com logo in svg

WS WS-P48, User Manual, Page: 29 / 34

Share
Download
WS WS-P48 User Manual Download Page 29

 

Delay page

 – from this page it is possible to set the Output Channels Delay Time from 000.0000mS up to 400mS, 

by steps of 1mS or 20.8uS. 
To set the Delay time press ENTER an arrow will appear on the left of the screen “

->

”.  then use the “PM2” 

encoder to set the Delay Time in steps of 1mS and the “PM3”, for setting the “fine” Delay Time in steps of 20.8 
microseconds. 
The following is an example screen for the “Delay” page where the Delay Time of Output Channel 1 is set to 
160.1872mS: 
 

Out-1        Name            Delay 
-> Delay  =  160.1872mS 

 
 
 

 

Polarity page

 – from this page it is possible to set the Output Channels Polarity, by using the “PM2” or “PM3” 

encoders. 
The polarity can be “Normal” or “Inverted” (which means rotated of 180 Degrees). 
 
 
 
 
The following is an example of a “Polarity” screen where the Polarity of Output Channel 1 is set to “Normal” 
 

 

Out-1        Name          Polarity

-> Polarity    =      Normal       

 
 
 

 
 

 

                Input and Output Channels Last Edited Parameter Return Function 

 
Once you have escaped out of parameter editing within the individual Input or Output channels the WS-P48 will 
remember this last editing action on that Channel.    When you return for your next editing action pressing the EDIT 
button on that channel will immediately return you to the screen related to this last editing action.       
 

This function makes fine tuning or modifying easier when it is necessary to make a number of adjustments to the 
same parameter in a short time sequence. 
 
 

Input Channels and output Channels LINK Function 

 
The WS-P48 is able to perform a unique LINK MODE between Input Channels as well as a link between Output 
Channels to enable quick and immediate editing (you cannot link output to input channels).   

 
To link channels when editing, you will need to select a “Master” channel that will be the one to be edited and have 
it’s parameters displayed on the LCD screen.  You can then select and link other channels (Slaves) that you wish 
to apply the same changes to.   
 
To enter a link mode session, select the Master channel Edit mode, then link the Slaves by pressing their related 
Edit buttons. 
All Linked channels will be selected ready for adjustment when their “Blue” LED is lit in the Editing mode. 
Now all Slave channels and only those selected will modify their parameters accordingly as you edit the Master 
channel. 
All other existing parameters will stay the same within the Slave Channels unless edited by this link with the 
Master channel. 

 
Note: 

The LINK function is NOT a COPY function. 

 

If we want to edit the limiter of the Output channels 1/2/4, we can enter the editing mode of Output Channel 1 by 
pressing the related Edit button and turning on the Blue LED below the Output Channel 1 LED meters.  This 
assigns the “role” of Master and displays this channel’s parameters on the LCD: 

Out-1          Name          Limiter

A: 5ms    R: 0.2s  +5.0dB

 
 
 
 
 
 
 
 
 

 

Summary of Contents for WS-P48



































Reviews:

No comments