SECURITY UTILITY
-- User Password --
Press “ENTER” to gain access to the “Enable Password” screen:
Enable Password
Password: Disable *
Once a Password has been entered into the WS-P48 through the steps described in the previous paragraph, it
is possible to “Enable” or “Disable” the password function and therefore lock the WS-P48 restricting access
to all functions.
When a password has been entered you will be able to select the “Enable” option from the menu and the unit
will not be accessible for editing. In “Locked by Password Status”, all WS-P48 functions are inhibited to the
User, including the use of the Mute A/B/C/D and MUTE 1/2/3/4/5/6/7/8 buttons.
The only access available is to the parameters of the input/output channels (accessible by pressing the edit
button), ONLY to READ the values (no editing possible) if the “be shown” flag in the “Show Parameter” Sub-
Menu has been selected.
Once “Locked by Password” the “keylock” icon will appear on the default LCD screen and no menu pages will be
accessible, with the exception of the “User Password” option.
To regain access to the full operation of the WS-P48 ENTER to the “User Password” screen and press the
UTILITY Button to access the following screen to enable the correct password to be entered:
User Password
[ ]
After the correct password has been entered, you will be able to access the full functionality of the WS-P48,
the “lock Icon” will disappear from the “Default Screen” and automatically the “Enable Password” page will be
back to the “Disable” condition:
Enable Password
Password: Disable *
If no Password has been set within the WS-P48, as described in the previous paragraphs, the WS-P48 will not
allow you to enable any Password, and the choice in the “Enable Password” will be limited to only the “Disable”
option.