manualshive.com logo in svg

WS WS-P48, User Manual, Page: 10 / 34

Share
Download
WS WS-P48 User Manual Download Page 10

 

 

Menu “UTILITY” [access by pushing the “UTILITY” button] 

 

From the “Default Screen”, it is possible access the “UTILITY” menu pushing the “UTILITY” button and the Sub-
Menus pages can be selected just rotating clockwise and counter-clockwise the “NAV/PM1” encoder. 
Once selected the sub-menu page, using the “ENTER” button can be accessed the Sub-Menus pages, again 
“scrollable” using the “NAV/PM1” encoder and accessible for the parameters' editing pushing again the “ENTER' 
button. 
Through the “ESC” button, it is any time possible to go back to the action and page preceding the “ENTER” button 
use. 

Once inside the Sub-Menus pages, the several options can be scrolled and using the PM2 or PM3 encoders and 
selected/confirmed pushing the “ENTER” button. 
 

Note

: In every Sub-Menu the option currently selected/running will have an asterisk “

*

” showing to the right of the 

description on the LCD screen.     
 
Options that are not selected/running will be displayed with NO Asterisk.     
 
Pushing the ENTER button on an unselected option will mean an asterisk will then appear and this option will now 
take over as the currently selected/running option. 
 

 

System Utilities Sub-menu

 – this sub-menu allows to access several operations related to the WS-P48    Start Up 

and General Configuration: 
 

UTILITY MENU 

--    System Utilities    -- 

 
 
 
 
 
From the “System Utilities Sub-menu”, pushing “ENTER” and then using the “NAV/PM1” encoder for scrolling will 
give access to the following pages: 

 

−

 

Delay Time/Distance:

 this page allows you to select the measurement unit to be used for the Delays: Time (in 

milliseconds “ms”) or Distance

 

(in meters “m”): 

 

 

SYSTEM UTILITY 

--        Delay Units        -- 

 
 

 
 
 

By pressing ENTER and rotating the “PM2” or “PM3” encoder, it is possible to select the measurement unit to 

be used for the delay, which will be confirmed by pushing the ENTER button. 
The following screen shows the selected delay measurement is Time (milliseconds) 

 

Delay Units 

Unit :    Time (ms)                      *

 

 
 
 
 
 

−

 

Software Version:

 this page allows you to confirm the Software Version running on the WS-P48: 

 

SYSTEM UTILITY 

--   Software Version   -- 

 

 
 
 

 

The correct Software Version is “V1.03” 

 
 
 
 
 
 
 

 
 

 

Summary of Contents for WS-P48



































Reviews:

No comments