2-1
2 NEW MACHINE SETUP
If you are not completely familiar with the Safety Instruction Manual read it now before proceeding with the
Pre-Delivery Service of the mower.
The following items must be completed before attempting to operate a newly delivered machine.
1. Inspect the mower for any damage, missing parts, and labels.
2. Check for any recall or service notices.
3. Check and adjust engine oil.
4.
Check and adjust hydraulic fluid level.
5. Check and adjust rear tire pressure – 18-22 psi. is recommended. A change in tire pressure may require
the cutter deck to be readjusted.
6.
Connect battery cables, red first, and then black.
7. Check the deck height select for proper operation and range.
8. Add regular unleaded gasoline to fuel tank.
9. Check brake and control interlock.
a. Try starting the engine with the parking brake released. (Engine should not start).
b. With the hand controls in the middle or neutral position, apply the parking brake.
c. Start the engine.
d. Check if the parking brake locking system prevents the machine from being driven while engaged. If
not, service the brake system.
e. Release the parking brake. Move the control levers, one at a time, to make the wheels move in forward
and backward rotation.
10. Test the Clutch/Brake
a. Insure the area is clear of people and objects that may be thrown.
b. Move the engine throttle control to ¾ RPM speed setting.
c. Turn on the blade clutch switch and check for normal operation.
d. Cycle the PTO a few times about 10 seconds apart. If the blades do not start and stop with-in 7
seconds each time, service the blade brake system.
e. With the blades on, disengage the OPC switch to test the Operator Presence Control switch (OPC).
The engine should die and the blades should stop with-in 7 seconds. If not, service the OPC system.
f. Disengage the blades.
11. Drive the mower around an open level area. Check that the mower drives in a reasonably straight line.
12. Listen for any unusual noises and test for irregular operation and adjust or service as necessary.
13. Go over the safety information and operating procedures in this manual with the operator. Instruct each
operator in proper operation and observe during initial operation on a level area. Repeat until the operator
is familiar and comfortable with the basic operation and use of the mower.
Dealer:
Register the mower online within 14 days from the date of retail purchase. Registering the product indicates
you have successfully completed the pre-delivery service checklist. The limited warranty is considered invalid
unless the unit is registered and the above steps are taken.
Remember, the purchaser is both your customer and our customer and his/her satisfaction is very important.
Thank you for supporting our products.
