WRIGHT STANDER X 79490219 Operator'S Manual Download Page 22

7-2

Rental Use

The above warranty periods are limited to a maximum of ninety (90) days for power equipment that is used for 

rental purposes.

Other conditions

The Mower, including any defective part, must be returned to an Authorized WMI Service Dealer within the 

warranty period. The expense of lost production time and delivering the Mower to the Authorized WMI Service 

Dealer for warranty work and the expense of returning it to the Owner after repair will be paid for by the Owner. 

WMI’s responsibility is limited to making the required repairs and no claim of breach of warranty shall be cause 

for cancellation or rescission of the contract of sale of any WMI power equipment. 
This Warranty does not cover any WMI power equipment that has been subject to misuse, neglect, negligence, 

burning in any fire, flooded by water, damaged in an accident, or that has been operated or maintained in any 

way contrary to the operating and maintenance instructions as specified in the Owner’s Manual. The Warranty 

does not apply to any damage to the Mower that is the result of improper maintenance; or to any WMI power 

equipment or parts that have not been assembled or installed as specified in the Owner’s Manual. The 

Warranty does not cover WMI power equipment that has been altered or modified changing performance or 

durability. In addition, the Warranty does not extend to repairs made necessary by normal wear, or by the use 

of parts or accessories which, in the reasonable judgment of WMI, are either incompatible with the Mower or 

adversely affect its operation, performance or durability. 

WMI reserves the right to change or improve the design of any WMI power equipment without assuming any 

obligation to modify any WMI power equipment previously manufactured.
All other implied warranties are limited in duration to the applicable one (1) year or two (2) year warranty 

period or ninety (90) days for units used for rental purposes. Accordingly, any such implied warranties including 

merchantability, fitness for a particular purpose, or otherwise, are disclaimed in their entirety after the expiration 

for the appropriate one (1) year,  two (2) year, or ninety (90) day warranty period. 
WMI’s obligation under this Warranty is strictly limited to the repair or replacement of defective parts and WMI 

does not assume, or authorize anyone to assume for them, any other obligation. Some states do not allow 

limitations on how long an implied warranty lasts, so the above limitation may not apply.
WMI assumes no responsibility for incidental, consequential or other damages including, but not limited to, 

expense for gasoline, expense of delivering the Mower to an Authorized WMI Service Dealer and expense of 

returning it to the Owner, damage by fire, mechanic’s travel time, telephone charges, rental of a like product 

during the time warranty repairs are being performed, travel, loss or damage to personal property, loss of 

revenue, loss of use of the Mower, loss of time or inconvenience. Some states do not allow the exclusion or 

limitation of incidental or consequential damages, so the above limitation or exclusion may not apply.

This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

This Warranty applies to all WMI power equipment retailed and located in the United States of America and 

Canada.
*Non-Commercial: Mower is used only on one home lot. Use at multiple locations is considered commercial 

use and the commercial warranty would apply.
For the location of the Authorized WMI Service Dealer nearest you or other information, such as Parts Lists 

and Owner’s Manuals, please visit our website at: www.wrightmfg.com 

Summary of Contents for STANDER X 79490219

























Reviews: