Wright Manufacturing Stander ZK Series, Instruction Manual, Page: 20 / 44

20
4.6 Deck Lift Lever
The “Quick Cut” height selector will adjust the cut height in ¼” increments.
To operate, ensure the cutter deck is in the full up and locked position,
insert detent pin (A) in the desired cut height hole (B), grab deck lift handle (C),
with thumb, push down on button (D) and lower to the selected cut height.
4.7 Safety Interlock System
The Wright Stander ZK is equipped
with a safety interlock system. The
PTO must be disengaged, brake
applied and control levers in the neutral
position in order to start the machine.
With the brake applied, the controls are
locked in the neutral position.
1 ½” - 5 ½”
Cut Height
A
B
C
D