Page | 10
Setting up UltraPath 2
UltraPath 2 is a modular spectrophotometer system. Its main components are: UltraPath 2
sample cell and TIDAS S 300 UV/VIS spectrometer module. The assembly of the UltraPath 2
system is described below.
Parts List
Part Number
Quantity
Description
UPATH2-CELL
1
UltraPath 2 Cell
TIDAS S 300 UV/VIS
1
UV/VIS Spectrometer system (190-
720nm) including software, DH
Lightsource.
WVLUXDUV-S-0600-100-SMA
2
DUV Fiber (200-1200nm) 600um 100cm
SMA
WVLUXDUV-S-0200-100-SMA
1
DUV Fiber (200-1200nm) 200um 100cm
SMA
13395
2
SMA Bulkhead Feed Thru Connector, D-
hole
58006
1
Sample Injector Assembly for LWCC
58450
1
Kit, Adapter Syringe, LWCC
89372-2
1
LWCC Injection System
LOOP-5ML
1
Sample Loop Kit, 5 mL (2.5m PFA Tubing
1/16” ID x 1/8” OD + 2 x PEEK fittings
1/8"
OD Tubing x
¼”
-28 UNF)
PERIPRO-4LS
1
Peristaltic Pump, 4 Channel, low speed
QFT2*
1
25mm GFF Filter and 10mm Cuvette
Holder, SMA
CUV2012-1*
1
Quartz Cuvette, Style C, 12.4x12.4x45mm,
10mm, 3.5ml
* Used when you need to measure particulate absorption on glass fiber filter pads (see
Setting up QFT2 Glass Fiber Filter section)
–
not used with the UltraPath 2 System setup.
Opening the package
Upon receipt of this system, make a thorough inspection of the contents and check for
possible damage. Concealed loss or damage should be reported at once to the carrier and an
