NANOLITER 2020/200704
World Precision Instruments
19
Collet
Plunger
Withdraw plunger to
this position
Glass
Fig. 31—(Left) Use the four white navigation buttons to set the position of the plunger.
Fig. 32—(Right) Using the navigation buttons, withdraw the plunger until you see it reach its
withdrawn position at the base of the collet where the arrow is pointing in this image.
10. When you see that the
plunger is properly positioned at the base of the collet (1-2 mm
outside the opening of the collet), press
END STOP
. The travel limits are stored.
Fig. 33—Press the End Stop button.
11. Press
Back
to return to the
Configuration
screen. Press
Back
again to return to the
Command
screen.
Fig. 34—The Command screen displays.
