NANOLITER 2020/200704
World Precision Instruments
17
3. Press anywhere in the PUMP1 display area to make PUMP1 the active pump.
NOTE
: Make sure the
NANOLITER2020
is plugged into
Port 1
of the
MICRO2T
controller.
Fig. 26—To make a pump active, press anywhere in the PUMP Display Area on the Syringe
Status screen.
4. Press the
Configure
button to open the
Pump Configuration
screen.
Fig. 27—
Press Configure.
5. Press the
Selected Syringe
(Type) box to bring up the
Syringe Selection
screen.
Fig. 28—Press the Selected Syringe area to open the Syringe Selection screen.
