HDBaseT Lite Transmitter/PoH
14
5.1.4 Power Management
In addition to going to a low-power mode when using the Display Control functions, the
HDBaseT Lite Transmitter can be set to low-power mode via RS232.
Description
Command
Response
Enter low-power mode.
STANDBY<CR><LF>
STANDBY!<CR><LF>
Exit low-power mode.
WAKE<CR><LF>
WAKE!<CR><LF>
5.1.5 HDCP Compliance
Description
Command
Response
HDCP Compliance ON.
HDCP ON<CR><LF>
HDCP ON!<CR><LF>
HDCP Compliance
OFF.
HDCP OFF<CR><LF>
HDCP OFF!<CR><LF>
Get HDCP Compliance
status.
GET HDCP<CR><LF>
HDCP ON! <CR><LF>
OR
HDCP OFF!<CR><LF>
5.1.6 Device Baud Rate
The default baud rate for the HDBaseT Lite Transmitter is 9600. This can be changed
to accommodate various installation needs: 2400, 4800, 9600, 19200, 38400, 57600,
and 115200.
Description
Command
Response
Change device baud
rate (xxxx = new baud
rate)
SET xxxx<CR><LF>
baud rate is set to
xxxx<CR><LF>
Get device baud rate.
GET BAUD<CR><LF>
baud rate is set to
xxxx<CR><LF>
5.1.7 Device Information
Description
Command
Response
Get firmware revision
REV?<CR><LF>
V1.0.3<CR><LF>