HDBaseT Lite Transmitter/PoH
12
Please set the parameters of COM number, bound rate, data bit, stop bit and the parity
bit correctly, and then you are able to send command in Command Sending Area.
Default RS232 Settings:
9600 baud, 8 Data bits, 1 Stop bit, Parity=None.
5.1.3 Switching Commands
Description
Command
Response
Select HDMI input.
SET HDMI<CR><LF>
SET HDMI!<CR><LF>
Select VGA input.
SET VGA<CR><LF>
SET VGA!<CR><LF>
Get selected input.
GET IN<CR><LF>
GET IN!<CR><LF>
AND
HDMI 1!<CR><LF>
OR
This response indicates
HDMI input is selected.
VGA 1!<CR><LF>
This response indicates VGA