HDBaseT Lite Transmitter/PoH
6
To use the RS232 extension capabilities of the HDBaseT Lite Transmitter, connect the
TX, ground, and RX control signal wires to the removable 3-pole terminal block.
Consult the manual of the control device(s) to determine which pins the TX and RX
signals are carried on. Be sure to always connect TX to RX and RX to TX.
With the built-in Display control functionality, the HDBaseT Lite Transmitter can
automatically turn on and turn off the display when a source is connected or removed
from the device. Please see
4.8 Display Control Functionality
.
The default setting for the RS232 connections are:
l
9600 baud.
l
8 Data Bits
l
1 Stop Bit
l
Parity=none