HDBaseT Lite Transmitter/PoH
7
4. General Operation
4.1 Automatic Switching
The HDBaseT Lite Transmitter will switch automatically to the “last in” connected input.
For example, if a VGA signal is currently displayed, and then connect an HDMI source,
the unit will switch to the HDMI input. When the HDMI source is removed, the unit will
switch back to the VGA input.
4.2 RS232 Switching
By connecting the RS232 port of the HDBaseT receiver to a third party control system,
serial commands can perform switching functions, as well as provide greater
information about the units status. RS232 control can be used simultaneously with Auto
operation, but not when using the Display Control functionality.
4.3 LED indicators
Inputs
The HDBaseT Lite Transmitter has two bi-color LEDs to provide switching status.
LED State
Description
Off (both)
Unit is in low power mode.
Off (one)
Unit is in on- no signal detected on input, input not selected.
Green
Input selected.
Amber
Input has active video, input not selected.
Status
The HDBaseT Lite Transmitter has two LEDs to provide connectivity status.
LED State
Description
Link On
Connected to active HDBaseT receiver.
Link Off
Not connected to active HDBaseT receiver or in low power mode.
HDCP Solid
Encrypted HDCP signal to display.
HDCP Flashing
Non-encrypted HDCP signal to display.
HDCP Off
No HDCP link between source and display or in low power mode.