Woxcon NPG-DA24T, User Manual

Page: 16 / 21

18G HDMI 2x4 Splitter Kit over CAT5e/6/7
14
Command Function
Command Example and
Feedback
02 – HDMI input2.
>GetVideo Get the current input source.
>GetVideo
<Video 01
>SetAutoSwitch
[Param]
Enable or Disable auto switching.
Param = On, Off
On – Enable
Off - Disable
>SetAutoSwitch On
<AutoSwitch On
>GetAutoSwitch Get the auto switching status. >GetAutoSwitch
>SetSignalDetect
[Param] Set signal detection mode.
param = 5V, TMDS
>SetSignalDetect 5V
<SignalDetectMode 5V
>GetSignalDetect
Get signal detection mode.
>GetSignalDetect
<SignalDetectMode 5V
>SetSystemStandbyMo
de [Param] Enable or disable standby mode.
param= On, Off
>SetSystemStandbyMode On
<SystemStandbyMode On
>GetSystemStandbyM
ode
Get the status of standby mode.
>GetSystemStandbyMode
<SystemStandbyMode On
>SetSystemStandbyMo
deTime: [Param]
Set the delay time to send standby
commands after input signal
removed.
param = 1 ~ 10 min >SetSystemStandbyModeTime
: 10
<SystemStandbyModeTime:
10min
>GetSystemStandbyM
odeTime
Set the delay time to send standby
commands after input signal
removed. >GetSystemStandbyModeTime
<SystemStandbyModeTime:
10min
>SetSystemPowerMod
e [Param] Set system on or standby mode.
param= On, Off
>SetSystemPowerMode On
<SystemPowerMode On