Modular Matrix Switcher 16x16
21
No.
Pin
Function
1
N/u
Unused
2
Tx
Transmit
3
Rx
Receive
4
N/u
Unused
5
Gnd
Ground
6
N/u
Unused
7
N/u
Unused
8
N/u
Unused
9
N/u
Unused
When Modular Matrix Switcher 16x16 connects to the RS232 port of a computer
with control software, users can control it by that computer. To control the switcher,
users need to use RS232 control software.
4.3.2. RS232 Communication Commands
With this command system, users are able to control and operate the Modular
Matrix Switcher 16x16 with RS232 software remotely.
Note:
1. Please disconnect all the twisted pairs before sending command
EDIDUpgrade[X].
2. In the commands, “[”and “]” are symbols for easy reading and do not need to
be typed in actual operation.
3. Please remember to end the commands with the ending symbols “.” or “;”.
4. Type the command carefully, it is case-sensitive.
5. Commands pertaining to EDID only avails for signal cards that support EDID
management.
6. Modular Matrix Switcher 16x16 boasts 6 in-built EDID data, the chart below
illustrates the detailed information:
No. Detailed Information
1
1080p 2D 5.1CH
2
1080p 2D 2.0CH
3
720p 2D 5.1CH
4
720p 2D 2.0CH
5
4kx2k 2D 5.1CH
6
4kx2k 2D 2.0CH
Update in-built EDID data by sending command
UpgradeIntEDID[x].
.
