Modular Matrix Switcher 16x16
32
the router. Please connect as the following figure for LAN control.
Step1.
Connect the TCP/IP port of the Modular Matrix Switcher 16x16 to Ethernet
port of PC with twisted pair.
Step2.
Set the PC’s network segment to the same as the Modular Matrix Switcher
16x16. Do please remember the PC’s original network segment.
Step3.
Set the Modular Matrix Switcher 16x16’s network segment to the same as
the router.
Step4.
Set the PC’s network segment to the original one.
Step5.
Connect the Modular Matrix Switcher 16x16 and PC(s) to the router. In the
same LAN, each PC is able to control the Modular Matrix Switcher 16x16
asynchronously.
Then it’s able to control the device via a TCP/IP communication software.
4.4.2. Control Modular Matrix Switcher 16x16 via TCP/IP communication
software
(Exampled by TCPUDP software)
1)
Connect a computer and Modular Matrix Switcher 16x16 to the same network.
Open the TCPUDP software (or any other TCP/IP communication software) and
create a connection, enter the IP address and port of Modular Matrix Switcher
16x16 (default IP: 192.168.0.178, port:4001):
