Modular Matrix Switcher 16x16
7
2.2.2. 4I-DS& 4O-DS
Seamless DVI signal card. (
Please check the specification from 5.2.2
)
It is fully compatible with HDMI1.3& HDCP, and supports seamless transmission for
high-definition DVI, HDMI, VGA, AV, YPbPr signals. Signal format can be modified
via RS232 commands.
It boasts embedded EDID management (only for HDMI/ DVI signal), supporting
DDC.
4I-DS
: seamless input card, maximum four input signal. It can automatically identify
the format of input signal. Input signal can pass to output device through 4O-DS, or
other kinds of output cards.
4O-DS
: seamless output card, maximum four output signal. Automatically recognize
output signal (HDMI/ DVI), and output resolution is adjustable. Output signal can
come from 4I-DS, or from other kinds of input cards. It supports off memory for
resolution, signal format, HDCP compliant status.
Note:
1) When 4O-DS works with input cards except 4I-DS, to ensure reliable seamless
output, adjust the input signals to any one of the following 5 resolutions:
1024x768, 1280x720, 1600x1200, 1920x1080, 1920x1200.
2) Before using 4O-DS, upgrade the front-board and backboard of Modular Matrix
Switcher 16x16. Seek technical assistant from our technical supporters.
3) DVI interfaces on the signal card are same with the interfaces on 4I-DV& 4O-DV.
Pin C1~C5 are used in 4I-DS & 4O-DS.
When connecting to VGA, YPbPr or C-VIDEO signal, insert converting cables
according to specific pin definitions (see the figures below):
DVI-
C-VIDEO:
IN
P
U
T
S
IN
P
U
T
S
DVI 1
DVI 2
DVI 3
DVI 4
SEAMLESS
DVI 1
DVI 2
DVI 3
DVI 4
SEAMLESS
O
U
T
P
U
T
S
O
U
T
P
U
T
S
