42
Place the air-dried model on a
UV light or sunlight for about 10
minutes.
＊
Notice：
❶
In order to prevent the model from being
deformed by heat during illumination
,
the
air-dried model can be completely placed in
water or glycerol.
❷
The illumination time can be adjusted
according to the intensity of the light
,
so
that the model can be completely cured.
❸
Excessive curing time will cause the
model to shrink and yellow
,
Insufficient
curing time will result in incomplete curing
of the model. Cause the model to be too
soft.
Model
UV light
Adjustment of the printer
Recycled resin and tank cleaning
End of printing
Summary of Contents for SparkMaker SLA
Page 2: ......
