Leveling the printing platform
Use a large hex wrench to loosen the four screws on
both sides of the platform counterclockwise so that
the aluminum plate can move up and down freely.
27
Large hex wrench
Handle
Large hex wrench
Aluminum plate
＊
Notice：
❶
Do not completely screw down the screws.
❷
Make sure the handle is fully tightened.
❸
Please ensure that there are no residual
resin or obstacle on the aluminum plate and
the tank to affect the leveling.
❹
Make sure the tank is installed correctly.
Leveling the printing platform
Summary of Contents for SparkMaker SLA
Page 2: ......
