(DCS is rarely used in amateur radio)
Enable transmit DCS:
MENU 1 8 MENU
▼ to select
D023N
through
D754N
digital coded squelch code for transmit ,
MENU
EXIT
(DCS is rarely used in amateur radio)
Enable stopwatch:
MENU 2 5 MENU
▼ to select either
OFF
or
ON
,
MENU
EXIT
(when enabled start stopwatch by short press of
#
, press any key to pause, short press of
#
again to restart.)
10 Software
Software programming of the Wouxun radios enables additional features not available through manual keypad strokes or menus. These features may
include: mode switch password, reset password, welcome message, priority scan channel, set scanned channels, DTMF options and frequency range
unlocks. See the software help files for more information:
Wouxun software*:
http://www.wouxun.com/DownView.asp?ID=164&SortID=12
Commander software:
http://www.kc8unj.com/kguv.html
Chirp Apple software:
http://chirp.danplanet.com/
Open Wouxun Linux/Unix software:
http://owx.chmurka.net/?p=docs
Unlocking software (at own risk):
http://mods.dk
The majority of user issues with radio software are related to an incorrect port (or device name) setting for the computer-radio interface cable. Linux
users must also ensure they are members of the
uucp
group.
Unlocking software requires care or you may brick the radio. Save all factory settings first by doing a “Program, Read from Radio, File, Save”. If you
do an unlock the TX range
must
match the RX range. Also be aware that the internal filters and the antenna are designed for a limited frequency
range.
For wire cloning between similar radios see the Wouxun manual.
(* Wouxun software also works in Linux under Wine (
http://www.winehq.org/
) but the Commander software can be problematic with Wine).
16
Summary of Contents for KG-UV2D
Page 4: ...2 Front Panel Diagram 4...
Page 5: ...3 LCD Display Diagram 5...
