background image

2

1

2
3

4

5

6

7

8
9

Safety instructions

 Warning!

 When using this product basic safety precautions 

should always be followed. Failure to follow all instructions listed 
below may result in personal injury.

Read all these instructions before attempting to operate this 
product and save these instructions.

Keep work area clear and well lit.

Cluttered areas and benches invite injuries.

Make sure all moving parts are free from interference.
Ensure JAWHORSE

® 

is set up on firm, level ground in a stable 

manner.
Keep other persons away.

Do not let persons, especially children, not involved in the work 
touch the tool and keep them away from the work area.

Be aware of over-balancing.

 When a large piece is cut from one 

end of a job, the remaining piece may be heavy enough to tip the 
JAWHORSE

®

. Always ensure the workpiece is well supported.

Check to make sure that all fixing screws and knobs are 
tight and all legs are locked into place before operating the 
JAWHORSE

®

.

The tool must be used only for its prescribed purpose. 

Any use 

other than those mentioned in these instructions will be considered 
a case of misuse.
The manufacturer shall not be liable for any damage or injury 
resulting from such cases of misuse.  

Never stand on this product.
Dress properly.

10

11

12

13

14

15

16
17

Do not wear loose clothing or jewelry, they can be caught in 
moving parts.
Non-skid footwear is recommended when working outdoors.
Wear protective hair covering to contain long hair.

Use personal protective equipment.

Use safety glasses.
Use face or dust mask if working operations create dust.

Save all warnings and instructions for future reference.

 Refer 

to them frequently and use them to instruct others who may use 
JAWHORSE

®

. If you loan someone JAWHORSE

®

, loan them these 

instructions also to prevent misuse of the product and possible 
injury.

Do not use tools in damp or wet locations. 

Moist work piece and 

environment can not clamp firmly.

Ensure the work piece was clamped firmly and the lock release 
switch is on proper state before use.
Check damaged parts. 

Before further use of tool, it should be 

carefully checked to determine that it will operate properly and 
perform its intended function.

When not in use, tools should be stored in a dry locked-up 
place, out of the reach of children and do not allow persons 
unfamiliar with it.
Have your JAWHORSE

®

 serviced by a qualified repair person.

 Warning

The use of any accessory or attachment other than one 
recommended in this instruction manual may present a risk of 
personal injury.

Summary of Contents for WU063













Reviews: