10
2) CHAIN SAW JAW (See Fig.V-X)
Suitable for gripping logs or poles, and holding the chainsaw for
sharpening. These steel jaws also bolt onto the standard steel jaws
and are zinc plated for corrosion resistance.
Chain saw clamping blocks pivot back out of the way when not in
use and pivot forward when required.
Logs or poles up to 300mm in diameter are gripped firmly for chain
sawing, drilling, rabbeting etc.
The chain saw clamping vice makes an ideal clamp to hold a
chainsaw while sharpening the teeth. Two pairs of vices, either
side of the bar, ensure the clamping jaws are clear of the chain,
which can then be rotated as each tooth is filed.
3) SADDLEBAG
Saddlebag provides a convenient place to hold tools and other bits
and pieces.
Maintenance
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your tool. Never use water or
chemical cleaners to clean your tool. Wipe clean with a dry cloth.
Always store your tool in a dry place.
Environmental protection
Waste products must not be disposed of with household waste.
Please recycle where facilities exist. Check with your local
authorities or retailer for recycling advice.
