6
1
2
Operating instructions
Note:
Before using the tool, read the instruction book carefully.
INTENDED USE
The JAWHORSE
®
is a versatile workstation for holding, clamping,
supporting.
SET-UP INSTRUCTIONS
1. Put the JAWHORSE
®
upside down on the ground, loosen the
Rear Leg Locking Knob (5) and slide the rear leg from its storage
position. Pivot the leg to position and slide it all the way upward
then lift and slide it fully into its housing at the rear. Tighten the
knob. (See Fig. A-C)
2. Raise the Foot Pedal (9) until it “clicks” into position.
(See Fig. D-E)
3. Rotate the Front Legs (10) all the way forward until they “click”
into position. The Front Leg Locking Latch (15) will be open
automatically. (See Fig. E)
4. Turn the JAWHORSE
®
upright and recheck that all legs are
locked firmly in position.
FOLDING INSTRUCTIONS
Folding is the reverse procedure of above. (See Fig. F-K)
1. Ensure that the Lock / Release Switch (13) is in the “unlock
position”. ( See Fig. F)
2. Turn the unit upside down. Slide the front leg latch and fold the
Front Legs (10) into position. ( See Fig. G)
3. Draw the Foot Pedal (9) locking latch and place the Foot Pedal in
folding position. ( See Fig. H)
3
4
1 2
13
11
10
9
8
5
12
15
14
6
7
B
A
F
E
D
C
