8
High Frequency Multi-function Tool
EN
OPERATION INSTRUcTIONS
Note:
Before using the tool, read the instruction
book carefully.
INteNDeD USe
The power tool is intended for sawing and separating
wooden materials, plastic, plaster, non-ferrous metals
and fasteners (e.g. nails and clamps) as well as for
working on soft wall tiles and for dry grinding of small
surfaces. It is especially suitable for working close to
edges and for flush cutting.
1. MoUNtING AcceSSoRIeS
cAUtIoN:
For all work or when changing
accessories, always wear protective gloves and
make sure battery is removed. Avoid danger of injury
from the sharp edges of the accessories. Accessories
can become very hot while working, presenting danger
of burns!
WARNING: to reduce the risk of injury, do
not let the sharp side of the accessory face
back toward the user’s hand.
- loosen the flange
Use the Allen Key to rotate the Flange clockwise (See
Fig. A).
- Insert Accessories
Insert the Accessory onto the Universal Fit
TM
Accessory Interface (See Fig. B).
- tighten the flange
- Use the Allen Key to rotate the Flange
counterclockwise until accessory is tightened
securely (See Fig. C).
A
C
B
F1
E
D
F2
G
F5
F4
F3
