10
High Frequency Multi-function Tool
EN
3. MoUNtING tHe SUctIoN DevIce
(See fig. f1-f5)
When vacuuming, mount the suction device as shown
in F1-F5.
Note:
Using the sanding pad perforated. You can only
do the vacuuming after fitting the dust collector.
4. oPeRAtING tHe oN/off SWItcH
To start the machine, push the On/Off switch forward so
that the “I” is indicated on the switch.
To switch off the machine, push the On/Off switch
toward the rear so that the “0” is indicated on the
switch.
5. USING tHe vARIABle SPeeD DIAl
Select oscillation frequency (speed) while the motor is
running.
The Variable Speed Dial can be used to set the optimum
oscillating frequency according to the accessories used
and the respective application.
High oscillation frequency:
Sanding, sawing, rasping and polishing stone and
metal.
Low oscillation frequency:
Scraping, polishing varnishes.
A
C
B
F1
E
D
F2
G
F5
F4
F3
