9
High Frequency Multi-function Tool
EN
Note:
For prior model WORx Sonicrafter hex-interface
accessories and most other non-WORx branded
accessories, the Flange must be completely removed to
install accessory (See Fig. D).
2. MoUNtING/cHANGING tHe SANDING SHeet
(See fig. e)
Align the sanding sheet and press it onto the sanding
pad by hand.
Firmly press the power tool with the sanding sheet
against a flat surface and briefly switch the power
tool on. This provides for good adhesion and prevents
premature wear.
If one point has become worn, pull off the sanding
sheet, turn it 120° and place it on again.
Note:
For other various brands’ sanding pad, use
smaller flange provided.
A
C
B
F1
E
D
F2
G
F5
F4
F3
