8
Table loading station installation
1.
Loading station
with power supply.
2. The
electrical current
is supplied through
the cable that connects directly with the
loading station.
1
2
Wall mount installation
1. The loading station is screwed to the
wall
mounting
component (screw holes
provided, see back of loading station).
2.
Wall mounting
(screw holes provided).
3. After the loading station has been positioned
on the wall, connect it to the
power supply
using the cable provided.
1
3
2
Placing the xentissimo in the loading station
1. Insert the xentissimo from top to bottom.
2. Snap into the side clamps.
1
2
Removing the xentissimo
1. Press the two side buttons simultaneously.
2. Slide back and upwards to remove the unit.
1
2
Clip holder
1. Remove the plastic nub from the rear of the
xentissimo and put to one side.
2. Open the printer and remove the paper.
Slide the clip underneath. Tighten with a
Phillips head screwdriver. Reinsert the paper.
3. xentissimo with clip!
1
3
2
2.3 Loading station: table/wall installation and clip holder
