background image

10

Cards with a chip

Cards which store the information needed for electronic payment on a chip 
must be inserted in the chip reader.

Cards with a 
 magnetic  strip

Cards which store the information needed for electronic payment on a 
magnetic strip must be pulled through the swipe reader.

CC

Computer centre

CCC

Credit card company

CrC

Credit cards

CVC/CVV

Card Verification Code /Card Verification Value number used to identify the 
card.

EFT/POS

Electronic fund transfer at the point of sale.

EMV

Global specifications from Eurocard, MasterCard and VISA based on a chip 
card.

ep2

<EFT/POS 2000>, Swiss standard based on the EMV standard in electronic 
payment traffic.

GPRS

General Packet Radio Service (GPRS) is a packet-oriented transmission 
service that is used in the field of mobile telephone systems.

GSM

Global Standard for Mobile Communications

Online transaction

An online transaction is always directly authorised at the CCC.

Offline transaction

An offline transaction is authorised in interdependence with the card and 
terminal risk  management (e.g. if the amount of the previous transactions is 
less than the card limit or if the amount is less than the terminal floor limit 
on the card, etc.).

PF

PostFinance (Switzerland)

PIN

Personal Identification Number

PIN-based 
 transaction

For a PIN-based transaction, the customer must enter his/her PIN at the 
point of sale during the payment process.

PSW

Password

PUK

Personal Unblocking Key

Tip

Tip

TRM

Terminal

TRX

Transaction

WLAN

A Wireless Local Area Network is a “wireless” local radio network, which 
generally refers to a standard within the IEEE 802.11 family.

2.5 Abbreviations/Information

Summary of Contents for xentissimo



































Reviews: