6
enclosed area where open pilot lights or heat
appliances are present.
1.5.8. Maximum mowing results and safety can
only be achieved if the mower is properly maintained
and operated correctly.
1.5.9. Check all bolts frequently to maintain
proper tightness.
1.5.10. Keep all guard, shields and all safety
devices in place and in safe working condition.
1.5.11. Frequently check for worn or
deteriorating components that could create a hazard.
1.5..12. All replacement parts must be the same
as or equivalent to the parts supplied on original
equipment.
POTENTIAL HAZARD
· Hydraulic fluid escaping under pressure can
penetrate skin and cause injury.
WHAT CAN HAPPEN
·Fluid accidentally injected into the skin must be
surgically removed within a few hours by a doctor
familiar with this form of injury or gangrene may
result.
HOW TO AVOID THE HAZARD
·Make sure all hydraulic fluid hoses and lines are in
good condition and all hydraulic connections and
fitting are tight before applying pressure to
hydraulic system.
· Keep body and hands always from pinhole leaks or
nozzles that eject high pressure hydraulic fluid.
· Use cardboard or paper, not your hands, to find
hydraulic leaks.
· Safely relieve all pressure in the hydraulic system by
placing the motion control levers in neutral and
shutting off the engine before performing any work
on the hydraulic system.
1.6 SAFETY SIGNS
1.6.1 Keep all safety signs legible. Remove all
grease, dirt, and debris from safety signs and
instructional labels.
1.6.2 Safety signs must be replaced if they are
missing or illegible.
1.6.3 When new components are installed, be
sure that current safety signs are affixed to the
replaced components
1.6.4 New safety signs may be obtained from
your authorized equipment dealer or distributor or
from
Worldlawn Power Equipment, Inc.
1.6.5 Safety signs may be affixed by peeling off
the backing to expose the adhesive surface. Apply
only to clean, dry surface. Smooth to remove any air
bubbles.
1.6.6 Familiarize yourself with the following
safety signs and instruction labels. They are critical to
the safe operation of your machine.
1. On The Front Frame
2. On The Inner Height Adjustment Plate
3. On The Belt Shields, LH & RH
4. Under the belt shields, LH & RH
