2
English
Description
World Dryer high performance recess mounted, ADA compliant warm air hand dryer, powered by a high speed universal motor,
delivering 2300 Watts of drying power. This hand dryer runs on 115 Volts AC or 208/220-240 Volts AC electrical supply, depending on
model. Automatic and push-button models are represented in this product group. This appliance is intended for use in hand drying,
contributing to fast, hygienic and cost effective hand sanitation. This hand dryer may be used in commercial, industrial, office and
public facility environments.
General Specifications
Electrical Specifications
(cULus Listed, E19860, CE TUV-GS)
General Safety Information
DANGER
• Always disconnect the power source before servicing or installing the hand dryer.
DANGER
• This hand dryer must be properly grounded (Earthed) for safe operation. An identified ground connection point is supplied on the
hand dryer’s wall base.
• We recommend GFCI protection in wet or damp locations or as required by local code.
WARNING
• Use only the electrical power (voltage and frequency) specified for the model hand dryer being installed.
• Connect the hand dryer to the nearest suitable distribution panel.
• To limit a voltage drop, and insure efficient operation, use wire gauge as required by local or National Electrical Code.
• Do not connect to a branch circuit with CB or fuse protection over 20 Amps. This is in compliance with The National Electrical Code.
• All automatic model hand dryers must have a dedicated 20 Amp circuit as required by Underwriters Laboratories, Inc. (UL).
• Route all field wiring away from any moving parts within the hand dryer.
Unpacking
1. Remove all packing material. Recycling is recommended.
2. Carefully remove the hand dryer from the shipping carton, using care not to drop the appliance.
3. Inspect carefully for any damage that may have occurred during transit. Check for any loose, missing or damaged parts. If the
hand dryer is damaged, promptly inform the shipper or dealer where you purchased it.
Models
Nozzle
Drying Cycle
Dimensions (WxDxH)
Weight
Cover Material
XRM
Fixed
Automatic
13.1” x 13.8” x 4”
333 mm x 351 mm x 102 mm
26.5 lbs / 12 kgs
Stainless Steel
XRM
Fixed
Automatic
13.1” x 13.8” x 4”
333 mm x 351 mm x 102 mm
35 lbs / 15.9 kgs
Cast Iron
RM
Fixed
20 Seconds
13.1” x 13.8” x 4”
333 mm x 351 mm x 102 mm
35 lbs / 15.9 kgs
Cast Iron
Failure to disconnect the power source before installation or servicing can
result in serious injury or death from electric shock.
Failure to properly ground this unit could result in severe electrical shock
and/or death.
Risk of fire, personal injury or property damage are possible if local codes,
NEC codes or safety recommendations are not followed.
Models
Type
Electrical Input
Amperage
Watts
XRM5
Automatic
115 VAC, 60 Hz
20
2300
RM5
Push-button
115 VAC, 60 Hz
20
2300
XRM54
Automatic
208-230 VAC, 60 Hz
10
2300
RM54
Push-button
208-230 VAC, 60 Hz
10
2300
XRM548
Automatic
220-240 VAC, 50 Hz
10
2300
RM548
Push-button
220-240 VAC, 50 Hz
10
2300
CAUTION
Improper mounting could result in personal injury or property damage.
WARNING
Cancer and Reproductive Harm - www.p65warnings.ca.gov
