Workzone Q1W-SPO5-2200A User Manual Download

Page: 24 / 31

Troubleshooting

− Secure the end of the hose with the hose clamp.

− Wind the mains cord

around the cord holder at the rear side

of the device.

− Store the accessory parts in the compartments provided for this

purpose on the front and rear side of the washer.

Troubleshooting

WARNING!

Risk of injury!

Tampering with the washer could pose a risk to life from electric

shock, damage the washer and void warranty claims.

− Do not make any modifications to the washer.
The following table provides assistance in the event of

malfunctions. If the solutions provided here are unsuccessful,

contact the manufacturer or an authorised service centre at the

service address specified on the warranty card.

Fault

Cause

Solution

No function

The power supply is

interrupted.

Check the power

connection, mains

cord

and fuse; have

repairs performed by an

electrician if necessary.

The washer is

switched off.

Move the

ON/OFF switch

Individual

components are

defective.

Contact the

manufacturer or an

authorised service

centre at the service

address specified on the

warranty card.

Summary of Contents for Q1W-SPO5-2200A
































Search results

Summary of Contents for Q1W-SPO5-2200A

Reviews:

Related manuals for Q1W-SPO5-2200A

Brands by name

Popular brands

Workzone Q1W-SPO5-2200A, User Manual

Search results

Summary of Contents for Q1W-SPO5-2200A

Reviews:

Related manuals for Q1W-SPO5-2200A

Brands by name

Popular brands