background image

Safety

11

 

− Never store the washer such that there is a risk of it falling into 

a tub or a basin.

 

− Never reach to retrieve an electrical device if it has fallen in 

water. In such a case, immediately disconnect the mains plug 

from the socket.

 

− Make sure that children do not insert any objects in the washer.

 

− Always switch the washer off and pull the mains plug out of 

the socket when you are not using it, when you intend to clean 

it, to replace parts, or in the event of a fault.

 

WARNING!

Danger for children and persons with impaired physical, 

sensory or mental capacities (e.g. partially disabled persons, 

older persons with reduced physical and mental capacities) or 

lack of experience and knowledge (e.g. older children).

 

− This washer may be used by persons with impaired physical, 

sensory or mental capacities or those lacking experience and 

knowledge if they are supervised or have been instructed in 

how to safely use the washer and have understood the risks 

associated with operating it.

 

− This washer must not be used by children. Children must be 

supervised to ensure that they do not play with the device.

 

− Do not leave the washer unattended during operation.

 

− Do not let children play with the packaging. Children may get 

caught in it when playing and suffocate.

 

− Do not allow children to play with the cleaner. Children could 

swallow small parts and choke.

 

WARNING!

Danger of explosion!

The spraying of flammable liquids can cause an explosion.

 

− Do not spray any flammable liquids and do not use the washer 

in explosive environments.

Summary of Contents for Q1W-SPO5-2200A
































Reviews: