Using the cleaning attachments
19
3. Push the spray lance
16
slightly in the direction of the spray
gun
11
and turn the spray lance anticlockwise at the same time.
4. Remove the spray lance.
Fitting the turbo nozzle
NOTICE!
Risk of damage!
When using the turbo nozzle, there is a very high risk of damaging
sensitive surfaces.
− Be very careful when using the turbo nozzle during cleaning.
− Start using the washer by working at a substantial distance
and reduce this as needed.
The turbo nozzle
19
produces a rotating high-pressure jet that can
also get rid of stubborn dirt.
1. Place the turbo nozzle on the quick lock
15
of the spray lance in
such a way that the small rectangular elevation fits exactly into
the rectangular recess in the spray lance
16
.
2. Press the turbo nozzle down firmly on the spray lance.
The yellow button of the quick lock clicks once the nozzle is
positioned correctly.
Removing the turbo nozzle
1. Stop the washer and move the ON/OFF switch
5
to
OFF
.
2. Push the trigger
13
until the pressure in the washer has been
released.
3. Press the yellow button of the quick lock
15
on the spray lance
16
and pull off the turbo nozzle
19
.