Using the cleaning attachments
20
Fitting the Vario pressure nozzle
The Vario pressure nozzle
20
produces a fan beam at a 30° angle.
1. Place the Vario pressure nozzle on the quick lock
15
of the spray
lance in such a way that the small rectangular elevation fits
exactly into the rectangular recess in the spray lance
16
.
2. Press the Vario pressure nozzle down firmly on the spray lance.
The yellow button of the quick lock clicks if the Vario pressure
nozzle is positioned correctly.
3. Turn the Vario pressure nozzle to set the desired water pressure.
Removing the Vario pressure nozzle
1. Stop the washer and move the ON/OFF switch
5
to
OFF
.
2. Push the trigger
13
until the pressure in the washer has been
released.
3. Press the yellow button of the quick lock
15
on the spray lance
16
and pull off the Vario pressure nozzle
20
.
Fitting the wash brush
The wash brush
17
is suitable for cleaning surfaces delicately.
In the process, the high-pressure jet is used to operate the wash
brush; the water strikes the surface to be cleaned only at lower
pressure.
The rotating wash brush head achieves the cleaning effect and the
removed dirt is washed away with the water.
1. Remove the spray lance
16
, see section “Removing the spray
lance”.
2. Put the wash brush onto the spray gun
11
.
3. To fix the wash brush, push it slightly downwards and turn it
clockwise at the same time.
