6. SYSTEM ASSEMBLY
inner contact is +6-36 VDC and the shell is GND.
Figure 6.2 – Inner power supply contact.
The standard package contains appropriate 5.5x2.5mm coaxial connector with a cable (length of 80 cm).
Figure 6.3 – Power supply cable - GND (Black wire) - VCC (Red wire).
Warning
: Failure to follow these instruc ons could damage the system
6.6 Turning the system OFF
In order to turning off the system, the on/off bu on must be pressed for at least 3 seconds. A er that, the on/off
bu on will start blinking with the period of one second, which signalizes the ongoing shutdown. A er releasing
the bu on, the system will turn off in about 10 seconds. Do not unplug the power supply during that me, it
may cause the data losses. Once the white LED of the on/off bu on turns off, the system is successfully off and
the power supply can be unplugged.
If you hold the on/off bu on longer than 10 seconds, the on/off bu on will start blinking with the period of half
a second, which signalizes the ongoing reset. A er releasing the bu on, the system will reset its resolu on to
1024x600 px and reboots itself.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Revision 1.0 EN, 24
th
Jan, 2017
All pictures are only for illustra on.
Real values may vary.
12