9. SYSTEM MENU (SETTINGS)
For each of the digital IO ports 3-7, you can select one of the following func ons:
PWM
mode:
• Change mode - switch thermal or visible cameras shown in the main and preview windows.
• Capture - capture selected images
• Record - start/stop recording video
• Zoom - zoom camera shown in the main window
• Pale e - change pale e of the radiometric image
• Isotherm ON/OFF - toggle isotherm ON or OFF
• Man Range ON/OFF - toggle manual range ON or OFF
• Range Max - set the manual range maximum limit
• Range Min - set the manual range minimum limit
• Isotherm Above - set the isotherm above limit
• Isotherm Below - set the isotherm below limit
• Temperature Range - toggle the temperature range LOW/HIGH
• Hide Overlays - hide all crosses and signs shown in the main window
• Calibra on - do the thermal image calibra on
Trigger
mode:
• Capture - capture selected images
• Record - start/stop recording video
• Calibra on - do the thermal image calibra on
Output
mode:
• Capture Start - set output to +5V at the moment of capturing image for the me of 100ms
• Capture Finish - set output to +5V when all of the selected images are saved to the internal memory
of Flash Drive for the me of 100ms
• Calibra on - set output to +5V during the image calibra on
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Revision 1.0 EN, 24
th
Jan, 2017
All pictures are only for illustra on.
Real values may vary.
38