17
PLEASE WORK, DRIVE, PLAY AND LIVE EACH DAY
WITH CARE AND CONCERN FOR YOUR SAFETY
AND THAT OF YOUR FAMILY AND FELLOW CITIZENS.
INSTRUCTIONS
(continued)
LUBRICATION
•
The Post Driver is designed with “special” polyethyl-
ene slide blocks for long trouble-free operation.
•
Oil or grease applied to the slide channel will make
the operation smoother and if applied after use will
help keep rust from forming in the channel.
•
There are grease fittings on the large side to side pivot
tube and on all the threaded tilt adjustment nuts. A few
shots of grease at the beginning of the work day is
recommended.
•
It is recommended to apply grease or oil to the
threaded portion of the tilt adjustment cranks before
storage to help prevent rust from forming.
•
Smear grease over the exposed portion of the plated
hydraulic cylinder rod after use to help prevent pitting
and rust from forming. If Post Driver is going to be
stored outside this is very important.
•
The hydraulic control base has a grease fitting on the
large, side to side, pivot tube and one on the lower,
front to rear, pivot pin.
POST HOLDER MOUNTING
Refer to page 28 and become familiar with the parts of
the Post Holder and the description of parts.
Locate the two holes in the left side of the support
channel. These holes are directly opposite the valve
mount bracket holes.
Bolt the Post Holder Mount weldment to the support
channel with the two
3
/
8
” x 1
1
/
2
” hex bolts. (See photo J.)
Assembly the remaining parts of the Post Holder refer-
ring to photo K.
Using the vertical handle on the arm weldment, swing
the Post Holder away from the ram and to the left. The
arm will go over center and remain to the left side of the
post driver.
PHOTO J
PHOTO K
Summary of Contents for HPD-16 HSS
