Worksaver HPD-16 HSS, Owner'S And Operator'S Manual, Page: 19 / 42

INSTRUCTIONS
(continued)
MODELS HSS ATTACHMENT TO
PRIME MOVER
——————————————————
3. Enter the prime mover. Fasten seatbelt, start engine.
Disengage the parking brake.
4. Follow the attaching procedure in the prime mover
owner's manual. Align the attachment mechanism
with the mounting on the post driver, attach to the
prime mover on loader.
5. Engage the parking brake and shut down the prime
mover. Be sure to relieve pressure to the auxiliary
hydraulic lines.
6. Unfasten safety restraints and exit the prime mover.
7. Engage the latching mechanism to secure attachment
to loader. The lockpins must be completely extended
and secured into the retaining slots.
8. Re-enter the prime mover. Fasten seatbelt and re-
start engine.
1. Position the attachment on a level surface.
2. The quick attach coupler handles should be in the
unlocked position with lock pins retracted, Figure 2.
Improper attachment of the post driver could result
in injury or death. Do not operate this product until
you have positive indication that the attachment is
securely mounted.
Attachment coupler handles must always be
rotated to LOCK POSITION to prevent coupler latch
from disengaging and attachment from falling off.
Figure 2. Quick Attach Coupler Handles - Unlocked
Figure 3. Attachment Coupler Handles - Locked
9. Carefully raise the loader and cycle the rollback/tilt
cylinders to check clearances and to ensure that the
attachment is securely mounted.
REMOVING THE POST DRIVER
1. If possible, find a level solid location to place the
attachment. This makes it easier to disconnect and
re-connect later on.
2. Lower the attachment to the ground.
3. Engage the parking brake and shut down the prime
mover. Be sure to relieve pressure to the auxiliary
hydraulic lines.
4. Unfasten safety restraints and exit prime mover.
5. Disengage attachment-locking mechanism (mechan-
ical type).
6. Enter prime mover, fasten safety restraints and start
the prime mover.
7. Disengage attachment-locking mechanism (hydraulic
type).
8. Disengage the parking brake, and back away from
the attachment.
WARNING
WARNING
18