background image

2

LIMITED WARRANTY

Worksaver warrants to the original purchaser of any new Hydraulic Post Hole Digger (Models 614HC, 624HC,
714HC, 724HC, 814HC, 824HC, 914HC and 924HC), that the equipment be free from defects in material and
workmanship for a period of one (1) year for non-commercial, state, and municipalities. Use ninety (90) days
for commercial use from date of retail sale.

Replacement or repair parts installed in the equipment covered by this warranty are warranted for ninety (90)
days from the date of purchase of such part or to the expiration of the applicable new equipment warranty
period, whichever occurs later.

Such parts shall be provided at no cost to the user during regular working hours. Worksaver reserves the right
to inspect any equipment or parts which are claimed to have been defective in material or workmanship.

DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES

Worksaver’s obligation under this warranty, to the extent allowed by law, is in lieu of all warranties, implied or
expressed, including implied warranties of merchantability and fitness for a particular purpose and any  liabili-
ty for incidental and consequential damages with respect to the sale or use of the items warranted. Such
incidental and consequential damages shall include but not be limited to: transportation charges other than
normal freight charges; cost of installation other than cost approved by Worksaver; duty; taxes; charges for
normal service or adjustments; loss of crops or any other loss of income; rental of substitute equipment,
expenses due to loss, damage, detention or delay in the delivery of equipment or parts resulting from acts
beyond the control of Worksaver.

THIS WARRANTY SHALL NOT APPLY:

1. Worksaver is NOT responsible for damage to augers caused by hitting underground objects (rocks, roots,

etc.) or for bent augers caused by moving the power unit with the auger in the ground.

2. To vendor items which carry their own warranties, such as hydraulic motors, tires, and tubes.

3. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident.

4. If parts not made or supplied by Worksaver have been used in connection with the unit, if, in sole judge-

ment of Worksaver such use affects its performance, stability, or reliability.

5. If the unit has been altered or repaired outside of an authorized Worksaver dealership in a manner which,

in the sole judgement of Worksaver affects its performance, stability or reliability.

6. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid,

worn blades, or to normal deterioration of such things as belts and exterior finish, due to use or exposure.

7. To expendable or wear items such as teeth, chains, sprockets, belts, springs and other items that in the

company’s sole judgement is a wear item.

ADDITIONS TO  LIMITED WARRANTY

In addition to the Limited Warranty printed above, 

Worksaver, Inc.

provides:

1. Five years’ (60 months) warranty on the gearbox for farm use and 1 year (12 months) for commercial use

and;

2. Three years’ (36 months) warranty on hydraulic motor for farm use and six (6) months for commercial use

IF

all of these components have been properly maintained and lubricated and that they have not been subjected
to abuse or misuse.

NO EMPLOYEE OR REPRESENTATIVE OF WORKSAVER IS AUTHORIZED TO CHANGE THIS WARRANTY IN
ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE IN WRITING AND SIGNED
BY WORKSAVER’S SERVICE MANAGER, POST OFFICE BOX 100, LITCHFIELD, ILLINOIS  62056-0100.

Summary of Contents for 614HC
































Reviews: