Workrite Ergonomics | 800.959.9675 www.workriteergo.com
5 of 12
Attach Framesets to Legs
Flip the Frameset back over so the Bumpers and
Side Bars will rest on the Worksurface.
Loosen the Joining Bracket on the Frameset at
locations shown with the Allen head bit or wrench.
NOTE! Loosen frameset but do not
disassemble!
Move the internal Joining Brackets
out of the way to allow attachment
of center leg. Keep frameset loose.
Place Center Leg (A) in Frameset (C).
Attach both Framesets (C & CC)
to the Center Leg (A) using six
5/16- 18 × 1" Flat Head Socket Cap
Screws (U).
With frameset still loose, attach the
two outer legs to the frameset using
eight 5/16-18 × 1" Flat Head Socket
Cap Screws (U).
U
U
A
U
A
A
3
a
a
a
a
U
5/16-18 × 1" Flat Head
Socket Cap Screw
Hardware at actual size
b
b
b
d
d
c
c
e
e
e
Joining Bracket
To avoid stripping the threads, always
insert and make the first few turns
of the screw BY HAND with provided
Allen wrench, ensuring it is in straight.
C
CC
Make sure Frameset is
oriented with "knee saver"
areas towards user
Side Bar (D)
facing down
