11
PH: 866.476.9217
Figure 5: Torque Reaction Arm Orientation
Since reaction torque equals output torque,
be sure to select an anchor point or stationary
base which is sufficient to withstand the torque
reaction forces imposed upon the Torque
Reaction Arm.
24” Torque
Reaction Arm
reaches
Stationary
Object
24” Torque
Reaction Arm
with Pipe
Extension
reaches
Stationary
Object
Pipe Extension
≥ 6” Overlap
When positioning the
GO-B3
, be sure the Capstan
Drive Fitting is positioned so that the Torque
Reaction Arm is at an angle
NO GREATER
than
45° to the ground. Torque reaction creates a
rotational force in the
opposite direction
from
which input force is applied.
IMPORTANT
