16
PH: 866.476.9217
10.
When the railcar gate is completely closed, release the On/Off
Trigger.
11.
Release the stored torque in the
GO-B3
Opener by pushing the
Selector Switch to the opposite direction, for example: from CW to
CCW, then momentarily depress the On/Off Trigger until Torque
Reaction Arm relaxes off the ground.
12.
Remove the
GO-B3
Opener from the railcar capstan.
13.
Re-engage the Gate Locking Mechanism
14.
Disassemble the components (
See
SECTION IV
and reverse
assembly instructions). Wipe down the components to remove dirt
and debris, and inspect them for damage or high wear. Charge the
Battery(s) for next use. Return the components to the Carrying
Bag. Store the Opener in a dry, secure area.
Maintain firm hand control of the Opener when
releasing stored torque from the
GO-B3
Opener, since
recoil from stored torque will be experienced. This
could cause the Torque Reaction Arm to spin in the
reverse direction and result in serious injury.
Stop applying force the moment the gate reaches
its fully closed position. Prolonged ratcheting can
cause damage to the Gate Opener.
CAUTION
Do not use other opening devices (pry bars,
come-a-longs, etc) in an attempt to "help" the
GO-B3
Opener.
